
	MAJOR BRANDS: Atlantic Specialty Castrol Exxon Mobil Houghton Madison Chemical Petro-Canada .................................................................. MAJOR PRODUCTS: Hydraulic Oils Gear Oil Bearing / Gear Lubricant Way Lube Cleaners Food Grade Compressor Oils Greases Spindle Oil Synthetics Rust Preventatives Quench Oils Mass Finishing Grinding Fluids Metalworking Fluids Cutting Oils Diesel Motor Oil Products by Industry Equipment .................................................................. SERVICES: Lube Survey Oil Analysis Fluid Management Interactive Map

Metalworking Fluids

Mobilmet Active Series Metalworking Fluids

Mobilmet Alpha, Sigma, Gamma and Omega are high performance mineral oil-type active cutting oils.
The balanced selection of additives maximizes performance over a wide range of pressures and temperatures
when machining under challenging conditions. This additive combination also controls buildup on the tool tip
for a better surface finish.

Mobilmet metalworking fluids contain the active anti-weld properties needed for cutting metals that are difficult
to machine. They are transparent on the workpiece, allowing good visual inspection of machined parts.
The Mobilmet Series includes products for a wide variety of operations, severities and metallurgies.

Mobilmet Non-staining Metalworking Fluids

Mobilmet 402, 404 and 416 are high performance mineral oil-type non-staining metalworking fluids.
They meet the anti-weld and lubricity requirements of moderate machining operations for most alloys.

Mobilmet metalworking fluids will not stain ferrous or nonferrous metals. Their non-staining nature permits their
use where complementary oils are required for the splash, hydraulic or spindle lubrication systems of metalworking
machines, or where bronze or white metal is used in machine components exposed to the oils.

Mobilcut 102 Metalworking Fluids

Mobilcut 102 is a conventional soluble cutting fluid that mixes readily with water to form a stable emulsion. It has
excellent rust-preventive properties, is foam-inhibiting, and is ideal for many cutting and grinding operations.

Mobilcut is a premium soluble oil that resists oil-water separation in conditions such as contamination or hard water.
It has a bactericide to prevent objectionable odors; when diluted as a 95:5 water-oil mixture, it can be used as a
fire-resistant hydraulic oil. Manufactured parts can also be protected from rust by immersing in a Mobilcut 102
emulsion at 150-180°F, then allowing parts to dry.

More Mobil Products:

Accurate Lubricants & Metalworking Fluids, Inc.• 403 Homestead Avenue; Dayton, Ohio 45417 USA • Phone: 937-461-9906 Fax: 937-461-9917
© 2011 by Accurate Lubricants & Metalworking Fluids, Inc. located in Dayton, Ohio U.S. All rights reserved. We are a fluids supplier to
American manufacturers and service providers in a geographic area that includes Ohio (Toledo, Columbus, Dayton, Springfield, Cincinnati),
Indiana (Indianapolis, Fort Wayne, Columbus, Richmond, Kokomo, Muncie, Marion, Lafayette, Anderson), and Northern Kentucky.
Accurate Lubricants & Metalworking Fluids, Inc. and Acculube are separate and distinct from Accu-Lube, a lubricant manufactured by ITW Rocol.