Castrol Industrial

Castrol has a vast offering of cutting & grinding fluids, soluble, synthetic, semi-synthetic, biostable,
straight oil & multi-metal compatible products. In addition, several unique Castrol products are available
to suit very specific machining applications.

Cutting, Grinding & Honing Oils, Gun Drill Oil, Ilocut, Honilo, Ilogrind

• Gun Drill Oil 2190 petroleum-based cutting oil for deep hole drilling of steels, aluminums, challenging materials
  such as titanium and Inconel. Outperforms conventional straight oils in severe operations.
  
• Gun Drilling Oil 2480 allows deep-hole drilling where metal toughness, not hardness, is the factor.
  Enables extreme dimensional accuracy, low micro finish; often precludes additional finishing.
  Extremely high anti-weld properties prevent burnishing or tearing wall finish.
  For cast, exotic alloys, stainless steel, tool steel.
  
• Gun Drill Oil C light viscosity oil is formulated with premium lubricity additives, anti-weld sulfur compounds and
  chlorinated extreme pressure agents. Made from virgin oils; free of PCA and PNA . Reduced dragout, high
  operator acceptance. For cast, exotic alloys, stainless steel, tool steel.
  
• Ilocut 5468 chlorinated neat oil for deep-hole drilling and machining of ferrous materials extends tool life,
  reduces chip welding, improves surface finish.
  
• Ilocut 5721 chlorine-free neat oil for cutting, hydraulics, gears. Ideal for screw machining
  on high alloyed steels, nickel, titanium.
  
• Ilocut 5770 chlorine-free neat oil for general machining of ferrous materials, aluminum, titanium,
  stainless steel. Ford approved.
  
• Ilocut 5713 chlorine-free neat oil delivers high cutting efficiency, multi-functionality.
  For ferrous materials, aluminum, titanium, stainless, yellow metals.
  
• Honilo 980 chlorine-free neat oil for honing and superfinishing cast iron, steel, aluminum and
  general machining of nonferrous metals. Excellent flushing, filterability and surface finish properties.
  
• Honilo 981 chlorine-free neat oil for honing and superfinishing cast iron, steel, and aluminum where
  critical superfinishing and dimensional accuracy are required. Also general nonferrous machining.
  Low viscosity, sulfur and chlorine-free; strong bioresistance.
  
• Honilo 710 chlorine-free neat oil for honing and superfinishing cast iron, steel, aluminum; general nonferrous
  alloy machining. Low odor, low VOCs, high filterability for long life. Ford, GM, Toyota approved.
  
• Ilogrind FGO 100 high performance flute grinding oil is compatible with sensitive oxide protective coatings.
  Excellent filterability and foam control, non-staining. Ideal for steels over RC55.
  
• Ilogrind 600 chlorine-free cutting and grinding oil for high speed surface, creep feed and form grinding.
  Premium grinding oil for consistent accuracy with fewer dresses, less wheel wear, less scrap.

>>TOP